DigiTech S200 Guia do Utilizador descarregar pdf (Página 19)

Section - 4 Appendix

This section provides you with information to Factory Reset the S-200, Foot switch menu set-up, Specification page and a Program list

Resetting the S-200

The following Factory reset procedures all you to reset the S-200 from Utility menu or from power up.

Warning- All User program information will be deleted when the reset is performed

Utility Menu Factory Reset

1. From Program mode, press the <Utility> button three times until you reach page three and the display will appear something like this:

2. To proceed with the reset, press the <Param 2> and the display will now read: ARE YOU SURE ?

3. If you wish to reset, press the <Param 4> button and the S-200 will proceed to reset. If you wish to abort, press the <Param 3>

button and press the <Program> button to return to Program mode.

Power Up Reset

1. To perform a factory reset from power up on the S-200, simply press and hold the <Program> button while applying power to the

unit. An asterisk will appear in the top line of the display and will appear like this:

2. Now release the <Program> button and immediately press the <Config> button and the S-200 will proceed to reset. In the process of

resetting, the S-200 will briefly display the current software version number and then return to Program mode.

Footswitch Set-Up Menu

The S-200 allows you to custom configure the footswitch menu for use with the Digitech FS-300 footswitch to perform numerous functions

such as:

Program Up Program Down Bypass

Rotary Speaker On/Off Delay Time Tap Repeat Hold

FACT

USER

UTIL

EDIT

CHNG

LINK

MIDI

Utility Menu

factory reset

page 3 of 3

S-200

User Guide

Section - 4 Appendix

1 2 ... 14 15 16 17 18 19 20 21 22 23

Sem comentários

DigiTech S200 Guia do Utilizador Página 19